Un sistema per il monitoraggio di sorgenti multiple in applicazioni di deposizione MBE

Per l'analisi dei fasci molecolari e il controllo del rate di deposizione

Le sorgenti di fasci molecolari richiedono un controllo accurato per la crescita di film sottili con una qualità di produzione riproducibile. Il sistema XBS fornisce un monitoraggio in situ di sorgenti multiple con un segnale real time in uscita per un controllo preciso della deposizione.


The high sensitivity and fast data acquisition of the XBS system provide signals for control of growth rates from 0.01 Angstrom per second.


  • High Sensitivity, Enhanced detection from 100% to 5ppb, mass range to 510 amu
  • Enhanced long-term Stability (less than ±0.5% height variation over 24 h)
  • Crossbeam ion source, beam acceptance through +/- 35° to transverse axis
  • Ion source control for soft ionisation and appearance potential mass spectrometry
  • Enhanced sensitivity for high mass transmission, Automatic mass scale alignment
  • 2mm beam acceptance aperture – configured to specific user application
  • Enhanced contamination resistance via the RF-only pre-filter stage
  • Integral UHV compatible water-cooled shroud
  • Detection limits down to 30 ions/second in molecular beam studies
  • Monitor growth rates of 1Å/minute and lower
  • Windows™ based MASsoft control via RS232, USB or Ethernet LAN


Mass range

320 or 510 amu

Growth rate determination 

< 0.01 Angstrom per second, species dependant

Cross beam ion source acceptance

+/-35o Beam apertures - 3D modelled

Data output

Real time analogue signal outputs

Residual gas analysis mode- RGA

Leak detection and chamber vacuum analysis