Golden Series

High Resolution CONTACT "GOLDEN" Silicon Cantilevers CSG10 series, resonant frequency 8-39kHz, force constant 0,01-0,5N/m.

High Resolution CONTACT "GOLDEN" Silicon Cantilevers CSG01 series, resonant frequency 4-17kHz, force constant 0,003-0,13N/m.

NEW PRODUCT! Probes for CONTACT/SEMICONTACT modes CSG30 series, resonant frequency 26-76kHz, force constant 0,6-2 N/m.
Specially designed for the applications when it's not clearly defined which mode should be used for sample investigation or when it's necessary to provide measurements in both modes of the same sample area without removing the tip.

Probes for noncontact/semicontact modes NSG01 series with PtIr conductive and reflective coatings coating (resonant frequency 87-230kHz, force constant 1,45-15,1N/m) compartible with SOLVER NANO and NANOEDUCATOR II microscopes (NT-MDT Co.)

Noncontact SPM probes NSG11 series with Pt conductive coating, each chip has 2 rectangular cantilevers, resonant frequency 190-325kHz, 115-190kHz; force constant 5,5-22,5N/m, 2,5-10N/m.

Noncontact SPM probes NSG01 series with PtIr conductive and reflective coatings, resonant frequency 87-230kHz, force constant 1,45-15,1N/m.

Noncontact/semicontact probes NSG03 series with Pt conductive and reflective coatings, resonant frequency 47-150kHz, force constant 0,35-6,1N/m.

Noncontact probes NSG30 series with PtIr conductive and reflective coating, resonant frequency 240-440kHz, force constant 22-100N/m.

Subcategories

AFM probes for Noncontact/Semicontact Modes with wide range of resonant frequencies and force constants.
Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.

AFM probes for Force Modulation Mode. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.

AFM probes for CONTACT modes. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive coating.

Any noncontact probes provides by NT-MDT (NSG01, NSG10, NSG03, NSG30, FMG01 series) are available with one of the following conductive coating - TiN, PtIr and Au.
Please, choose the coating you are interested in and see the cantilever specificaitons which are available with this coating.

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with PtIr conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.
 

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with TiN conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with Au conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.

AFM probes for Magnetic mode (MFM) with CoCr magnetic coating.

Noncontact/Semicontact and Contact AFM probes without tips.